Your trusted plumber in Coventry

Visual inspection of the boiler, identification of the fault, repair or replacement of failed parts such as thermostats, pumps or heat exchangers, system pressure check, and testing to confirm normal operation.

When you need it. Boiler not firing up, no hot water, radiators cold, unusual noises, leaks, or error codes on the display.

Before you get in touch. Check if the boiler is switched on. Note any error codes. Confirm your boiler type and approximate age if known.

Location of the leak source, temporary containment and damage control, isolation of the affected section, repair or replacement of the damaged pipework, system refilling and pressure testing.

When you need it. Visible water spraying from a pipe, dripping from joints, water stains on walls or ceilings, or wet patches in carpets and flooring.

Before you get in touch. Turn off the main water stopcock. Place buckets under drips. Note the location and severity of water.

Locating the blockage point, clearing debris using drain rods, pressure jets or vacuum equipment, flushing the drain clean, and checking flow to confirm the blockage is fully removed.

When you need it. Slow drainage, backed-up water in sinks or baths, gurgling noises from pipes, or sewage smell indoors or in the garden.

Before you get in touch. Stop using the affected drain. Note when it first blocked. Check if multiple drains are affected or just one.

Design of the heating layout, supply and fitting of boiler and radiators, pipe runs through the property, system commissioning, pressure testing, and handover with safety checks.

When you need it. New build installation, replacing an old system, extending heating to new rooms, or upgrading to more efficient equipment.

Before you get in touch. Confirm the number of radiators needed. Note any size or position preferences. Establish if the existing pipework can be reused.

Design consultation, removal of old suite, preparation of walls and floors, installation of bath or shower tray, toilet and basin, tiling, plumbing connections, and final testing of all water supplies and drainage.

When you need it. Updating an outdated bathroom, fixing broken fittings, adding a new en-suite, or improving accessibility and layout.

Before you get in touch. Take measurements of the space. Collect images of designs you like. Confirm budget and timeline expectations.

Repair or replacement of taps, ball valves and stopcock, isolation valves, new pipe runs for extensions, connection of washing machines and dishwashers, and fixing minor leaks in joints and connections.

When you need it. Dripping taps, leaking under-sink pipes, no water to certain areas, poor water pressure, or adding new appliances.

Before you get in touch. Locate your main stopcock. Turn off water if there is an active leak. Describe which fitting is faulty or what you need connected.